Example of a Datasheet Description

The technical description It is a description based on the technical characteristics of a chemical substance, a device or instrument, which generally uses a specialized language, to describe the operation of a part or all of an apparatus, scientific experiment or installation of any kind, be it electrical, electronic, mechanical, chemical, etc.

The technical sheet is a document that presents a series of ordered data, usually presented in the form of a table, with a language technician, using specialized measures, as is used for example in the technical sheets of automobiles, in which it mentions the type of motor (3.5 FSI, 4 Cylinders DOHC), in electronic devices (Audio power 50 W P.M.P.O) or chemical products (point of boiling 563 K; Density 1.4).

In general, it can be said that the description of the technical sheet is a way that people not specialized or well versed in the language technical, can understand and know how to handle a product or substance, through a brief explanation of the technical aspects contained in the records.

For example, the logic cards of computers, the characteristics and advantages of many or of all the technical aspects found in the file, as well as some instructions for configuration, assembly and gets better.

In the case of automobiles, an explanation is made of the most important data on the file, such as those relating to ergonomics (seating comfort, passenger compartment and controls), what are the technical improvements and advantages of the new incorporated technologies, and how they contribute to the economy, comfort or the environment environment.

In the case of technical descriptions of chemical products, they mention the precautions that must be taken for their storage, use and handling, the possible effects due to poisoning or poisoning and first aid measures while you can go to a doctor, as well as what to inform him, generally showing him the technical data sheet of the product.

Examples of Technical Description:

Example 1, description of an engine:

New low emission 4-cylinder diesel engine.

The new 4-cylinder diesel engine has a displacement of 1996 cc, reaching the 4500 rpm range, and a power of 180 hp and a torque of 210 lb / ft, which allows it to move with ease the 1350 Kilograms of bodywork. In addition, the 6-speed Automatic Gearbox allows you to reach 210 km / h.

The piezoelectric electronic injection system, combined with its 1:12 compression allows you to optimize the fuel mixture, which is 1: 10.5 air, thereby that the combustion is complete and the pollutant emissions comply with the EU5 standard, which means that it emits a maximum of .025 of pollutants per liter of fuel.

Example 2, of a motherboard description:

Once you have mounted your motherboard in the enclosure, locate and configure the following sockets and jumpers:

JP1: If you use a Pentium III processor, Place the Jumper between terminals 1 and 2; If you will be using a Celeron processor, place the Jumper between terminals 2 and 3.

JP2: This Jumper Resets the BIOS settings. If the machine freezes and cannot access the BIOS, disconnect it, short-circuit the JP2 terminals with a jumper for three seconds, remove the jumper, connect the machine and enter the BIOS.

SKT1: This connector is for the VGA video output bracket.

SKT2: Connect the 3D Audio bracket here.

SKT3: Here you connect the bracket for the Fax Modem.

Once you have finished connecting the brackets and configuring the jumpers, connect your hard drives and optical drives with the IDE cable included with your motherboard, boot your computer and install your system operational.

When your operating system is installed, insert the setup disk, which will install the appropriate drivers for your operating system.